MORO / MOBILE ENERGY
MR92.7KWH Mobile Energy Vehicle
A 92.7kWh mobile energy unit providing AC electricity and compressed air, with liquid cooling and remote control.
- Battery energy
- 92.7kWh
- Three-phase 380V AC output
- Up to 25kW
- Compressed-air flow
- 140L/min
AC electricity and compressed air for on-site work. The 80kW DC interface recharges this unit.
Product overview
MR92.7KWH is an integrated mobile energy station combining battery storage, a power conversion system, liquid cooling, compressed-air supply and remote-controlled mobility.
Technical specifications
| Parameter | Specification |
|---|---|
| Model | MR92.7KWH |
| Battery energy | 92.7kWh |
| Three-phase 380V AC output | Up to 25kW |
| Three-phase 220V AC output | Up to 20kW |
| Single-phase 220V AC output | Up to 12kW |
| DC recharging input to this unit | 80kW |
| DC recharge time | 10%–90% SOC, 25°C, ≤70 minutes |
| AC recharging input to this unit | 7kW |
| Compressed-air pressure | 0.4–0.8MPa |
| Compressed-air flow | 140L/min |
| Operating temperature | −20°C to 55°C |
| Control | Wireless remote control and onboard manual control |
| Turning radius | 4m |
| Dimensions | 1960 × 1350 × 1700mm |
| Equipment weight | ≤2 tonnes |
| Battery thermal management | Liquid cooling |
| Maximum output reel extension | 10m |
| Industrial display | 10 inches |
Power output and recharging
Select the AC output mode to suit the load: three-phase 380V up to 25kW, three-phase 220V up to 20kW or single-phase 220V up to 12kW. These are separate mode ratings.
The 80kW DC and 7kW AC interfaces recharge the energy station.
Application and control
For construction, municipal repair, emergency work, outdoor maintenance and sites without grid supply. Operate with wireless remote control or onboard controls, with laser obstacle detection as an operator aid.
Installation and operation
Check site access, ground conditions, load compatibility and electrical protection before operation. High-voltage maintenance requires qualified personnel.